Table of Contents
Advertisement
Safety notice on the care, handling
and disposing of batteries
NOTE: The battery used in this device may cause a
risk of fire or explosion or chemical burn if
mistreated.
• Do not short-circuit, charge or heat.
• Do not deform, take apart, insert in reverse;
observe the + and – markings on the battery and
equipment.
• Do not mix batteries. Replace all batteries at the
same time with new batteries of same system and
manufacture.
• Clean contacts on the battery and the equipment
before inserting new ones.
• Insert only the batteries which are listed in this
user guide. Store this manual for future reference.
• Do not directly weld or solder batteries.
• Do not take batteries apart.
• Do not dispose of batteries in fire.
• Do not expose battery contents to water.
• Store unused batteries in their original packing and
keep away from metal objects which cause a
short-circuit.
• Remove batteries from equipment if it is not to be
used for an extended period of time.
Keep batteries out of the reach of children. Do not
allow children access to batteries. If a cell or battery
has been swallowed, the person involved should seek
medical assistance promptly.
Dispose of damaged or discharged batteries
according to legal regulation or law. Contact your
local environmental authority for more details.
Do not dispose of batteries with standard household
waste and do not dispose of batteries in fire.
When used correctly, batteries provide a safe and
dependable source of power. However, if they are
misused or abused, leakage, venting, and in extreme
cases, explosion and/or fire can result.
Declaration of conformity
The declaration of conformity certificates applicable
to the Datatool S4 range of security systems can be
viewed at www.datatool.co.uk/product
Contacts
For further information please contact Datatool
by e-mail at info@datatool.co.uk
Our website www.datatool.co.uk contains full UK
dealer listings along with links/contact details for all
international distributors.
It also contains information covering the rest of our
product range of rider safety security and information
products along with useful hints and tips regarding
securing your machine.
®
(UK) Ltd
19
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the S4 and is the answer not in the manual?
Questions and answers
Hi. I have a bike which got unplugged from the t/charger causing a flat battery. The battery for the bike is ok now but the alarm initially kept going off then set,or so it seems. The alarm is not showing arming or disarming now. My bike can be started and the flashy light on the fob is working. Pls help?
To troubleshoot the Datatool S4 alarm system that is not showing arming or disarming after a flat battery:
1. Check the Fuses – Ensure all motorcycle fuses, including the alarm fuse, are intact.
2. Reset the Alarm – Disconnect the alarm system and reconnect it to reset.
3. Check the Wiring – Ensure all alarm connections are secure and no wires are damaged.
4. Use a Battery Conditioner – If the battery was disconnected, using a Datatool battery conditioner can help maintain the charge.
5. Check Ignition Sense – If the alarm does not respond even with ignition ON, verify that the alarm unit is receiving ignition sense.
6. Verify Kill Switch Position – Ensure the kill switch is in the ON position.
7. Reinstall Indicators Properly – If indicators were changed, ensure correct wiring to avoid alarm malfunction.
If the issue persists, contact your dealer for further assistance.
This answer is automatically generated