Special Features - Datatool S4 User Manual

Special features

The following features can only be accessed by an
APPROVED Datatool ® dealer. Should you wish to have
a setting changed from the factory default please
discuss this with your dealer first. The factory default
settings have been chosen to deliver the optimum
performance from the system.
The factory default settings are in bold text.
No. Feature
1 Erase other transmitter codes (save
code of transmitter being used)
2 Return software switches to default
3 System diagnostics with event memory
4 Movement sensor adjustment
(S4 Red and S4 Green only)
5 Shock sensor adjustment
6 Arm / Disarm Tones
7 Panic
8 Nudge sensor (S4 Red and S4 Green)
8a Nudge (S4 Yellow)
(Dealer selectable only)
NOTE: The inclusion of arm and disarm indication
beeps is strictly forbidden in all EU countries.
Settings available
This switch removes all remotes except the one
being used to carry out the process. Any remotes
required to operate the system MUST be re-coded
after carrying out this function
This setting returns ALL software switches to the
factory defaults, including customer set switches
Gives last five trigger types in reverse order
4 settings 2 ˚ , 3 ˚ , 4 ˚ , 5 ˚
10 settings
Default setting level 8
On/Off
On/Off
Off
On continuous warn-away with no trigger
Trigger on first nudge detection
1 Warn-away and trigger on second nudge
2 Warn-aways and trigger on third nudge
3 Warn-aways and trigger on fourth nudge
4 Warn-aways and trigger on fifth nudge
Trigger on first nudge detection
1 Warn-away and trigger on second nudge
2 Warn-aways and trigger on third nudge
3 Warn-aways and trigger on fourth nudge
4 Warn-aways and trigger on fifth nudge
17