X-Digital System PRO4 User Manual page 37

Error Value
0x00000001 FPGA Load Error
0x00000002 DSP Load Error
0x00000004 Ethernet Failure
0x00000008 No Storage Device
0x00000010 Tuner Not Locked
0x00000020
0x00000040
0x00000080
0x00000100
0x00000200
0x00000400
0x00000800
0x00001000 NV Config. Bad
0x00002000
0x00004000 DSP Timeout
0x00008000
This command is available to all profiles.
The TIME Command: This command deals with displaying and setting the internal
clock of the receiver. Simply typing TIME without any option will display the time
according to the receiver. Time is synchronized automatically with the satellite. Your
timezone may be set from the Affiliate webpage.
The TRACE Command: This command is used for diagnostic checks of the serial ports.
It is available only to the tech profile.
The TUNER Command: This command is used to view and modify all of the receiver's
tuner settings. Typing this command without any options will display a useful usage
message. Type this command followed by one of these options/argument combinations to
view or modify tuner settings:
Option Argument
SHOW
SET ,[kHz],[sps]
LNB ,[kHz]
SR ,[sps]
LNBV [ON/OFF]
CLEAR
X-Digital Systems
XDS-PRO4
Error Name
reserved
reserved
reserved
reserved
reserved
reserved
reserved
reserved
Fan Stopped
Table 3. SS and SF Error Code Values
Shows various technical data regarding the specified port.
Sets the tuners radio frequency to [kHz] and the tuner's
Sets the tuner's LNB offset to [kHz].
Sets the tuner's symbol rate to [sps].
Sets LNBV to ON or OFF depending on argument.
Error Value
0x00010000
0x00020000
0x00040000
0x00080000
0x00100000
0x00200000
0x00400000
0x00800000
0x01000000
0x02000000
0x04000000
0x08000000
0x10000000
0x20000000
0x40000000
0x80000000
Action
symbol rate to [sps].
Clears all tuner statistics.
37
Error Name
Recorder Overflow
Temp Warning
Temp Critical
reserved
reserved
reserved
reserved
LNB Over-current
reserved
reserved
reserved
URL Event Overflow
Internet Down
Storage Full
SW Download Rdy
SW Download Err.
R830001-1060 Rev B