Live View Page - Vista VK2-540VRD User Manual

Vip2 vk2-540vrd ip camera user manual
Table of Contents

Advertisement

Note:
HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt the traffic
between web browsers and servers. The HTTPS certificate controls the encrypted exchange
of information. The default administrator user cannot be deleted.

3.4 Live View Page

The live view page comes in eight
screen modes like 704x480(576),
704x240(288),
176x120(144), 640x480, 320x240,
and 160x120. Users are allowed to
select the most suitable one out of
those modes. Please, adjust the
mode in accordance with your PC
specifications
and
purposes.
• General controls
The video drop-down list allows you to select a customized or pre-
programmed video stream on the live view page. Stream profiles are configured under
Setup > Basic Configuration > Video & Image. See Basic Configuration, on
more information.
one out of video resolutions to be displayed on live view page.
The protocol drop-down list allows you to select which combination of
protocols and methods to use depends on your viewing requirements, and on the
properties of your network.
• Control toolbar
The live viewer toolbar is available in the web browser page only. It displays the following
buttons:
The Stop button stops the video stream being played.
start and stop. The Start button connects to the network camera or start playing a
video stream.
The Pause button pause the video stream being played.
The Snapshot button takes a snapshot of the current image. The location where the
image is saved can be specified.
352x240(288),
monitoring
The resolution drop-down list allows you to select the most suitable
Pressing the key again
16
page 25
for
toggles the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vip2 vk2-540vrd

Table of Contents