1. Manuals
  2. Brands
  3. Vista Manuals
  4. IP Camera
  5. VK2-1080MD37PTW
  6. Quick manual

Vista VK2-1080MD37PTW Quick Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
VK2-1080MD37PTW
Quick guide

Advertisement

Table of Contents
loading

Related Manuals for Vista VK2-1080MD37PTW

Summary of Contents for Vista VK2-1080MD37PTW

  • Page 1 VK2-1080MD37PTW Quick guide...
  • Page 2 Please read this manual thoroughly before use, and keep it handy for future reference.
  • Page 3 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PROCUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. CAUTION EXPLANATION OF GRAPHICAL SYMBOLS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated "dangerous voltage"...
  • Page 4 CAUTION: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. CE COMPLIANCE STATEMENT WARNING: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
  • Page 5 1. Description This manual applies to the VK2-1080MD37PTW mini dome camera with Pan/Tilt function. These cameras are fully featured for security surveillance and remote monitoring needs. They are based on the DSP compression chip, allowing real-time, full frame rate Motion JPEG and H.264 (or MPEG-4) video streams.
  • Page 6 Grey: ALARM INPUT Alarm input and out put connections Brown: GND Yellow : ALARM OUT Ethernet, RJ-45 port compatible with 10/100Mbps having PoE Black functionality.  Camera Dimension See the diagrams below for the exact dimension VK2-1080MD37PTW Dimensions Unit: mm...

  • Page 7: Installation

    2. Installation • Camera Installation Carefully remove the contents from the box, and verify that nothing was damaged in shipment. 1) Make screw holes for camera using the template sheet supplied 2) Remove the Camera Cover 3) Fix the camera using the anchors(2x) and screws(2x) provided. •...
  • Page 8 4. Press and hold down the WPS button on your AP (some router/AP will have a virtual button on their management software instead). Refer to your AP's documentation for details using its WPS functions When WPS configuration is done, wireless connectivity will be established and the security encryption, such as WEP or WPA-PSK, will be synchronized with the AP.

  • Page 9: Network Connection And Ip Assignment

    2.2 Network Connection and IP assignment The Network Camera supports the operation through the network. When a camera is first connected to the network it has no IP address. So, it is necessary to allocate an IP address to the device with the “Smart Manager”...

  • Page 10: Operation

    3. Operation The Network Camera can be used with Windows operating system and browsers. The recommended browsers are Internet Explorer, Safari, Firefox, Opera and Google Chrome with Windows. Note: To view streaming video in Microsoft Internet Explorer, set your browser to allow ActiveX controls.

  • Page 11: Access From The Internet

    3.2. Access from the internet Access from the internet once connected, the Network Camera is accessible on your local network (LAN). To access the network camera from the Internet you must configure your broadband router to allow incoming data traffic to the network camera. To do this, enable the NAT-traversal feature, which will attempt to automatically configure the router to allow access to the network camera.
  • Page 12 The resolution drop-down list allows you to select the most suitable one out of video resolutions to be displayed on live view page. out of video resolutions to be displayed on live view page. The protocol drop-down list allows you to select which combination of protocols and methods to use depends on your viewing requirements, and on the properties of your network.

  • Page 13: Network Camera Setup

    3.5 Network Camera Setup This section describes how to configure the network camera, and is intended for product Administrators, who have unrestricted access to all the Setup tools; and Operators, who have access to the settings for Basic, Live View, Video & Image and System Configuration. You can configure the network camera by clicking Setup in the top right-hand corner of the Live View page.
  • Page 14 3.7 More Information For more information, please see the Network Camera User’s Manual, which is available on the CD included in this package.
  • Page 15 Printed in Korea...

Table of Contents