Table of Contents
Advertisement
-. Compression
When it is necessary to adjust a smooth transmission status according to network
situations, users can increase the compressibility to carry out the network transmission
stably. On the other hand, when it is necessary to maintain a detailed monitoring screen
by enhancing the image quality, users can do so by decreasing the compressibility. In
ease case, please adjust this function according to the network status and monitoring
purposes. The default is 2000(Kbps).
-. Frame rate
Upon the real-time play, users should select a frame refresh rate per second. If the rate is
high, the image will become smooth. On the other hand, if the rate is low, the image will
not be natural but it can reduce a network load.
-. GOP size
Select the GOP(Group of Picture) size. If users want to have a high quality of fast image
one by one, please decrease the value. For the purpose of general monitoring, please do
not change a basic value. Such act may cause a problem to the system performance. For
the details of GOP setting, please contact the service center.
• Image Setting
Sometimes the image size is large due to low light or complex scenery. Adjusting the
maximum frame size helps to control the bandwidth and storage used by the Motion
JPEG video stream in these situations. Defining the frame size as Unlimited provides
consistently good image quality at the expense of increased bandwidth and storage
usage during low light. Limiting the frame size optimizes bandwidth and storage usage,
but may give poor image quality. To prevent increased bandwidth and storage usage, the
maximum frame size should be set to an optimal value.
-. JPEG Resolution
Same as the video settings.
-. JPEG Frame rate
Same as the video settings.
-. JPEG Quality
Select the picture quality. If users want to have a high quality of fast image one by one,
please decrease the value. For the purpose of general monitoring, please do not change a
basic value. Such act may cause a problem to the system performance.
When satisfied with the settings, click Save, or click Reset to revert to previously saved
settings.
30
Advertisement
Table of Contents
