Page 1
Installation Manual MManualManual Set up and user manual for the VVRD28V12CM760H VVRD28V12DN760H VVRD28V12DNLED760H Cameras...
Page 3
For assistance in installing, operating, maintaining and troubleshooting this product refer to this document and any other documentation provided. If you still have questions, please contact Norbain Technical Support and Sales: Vista, 210 Wharfedale Road, IQ Winnersh, Wokingham, Berkshire RG41 5TP, England. UK +44 (0) 118 912 5000 Note: You should be at the equipment and ready with details before calling Technical Support.
Page 4
This apparatus is manufactured to comply with the radio interference. A Declaration of Conformity in accordance with the following EU standards has been made. The manufacturer declares that the product supplied with this document is compliant the provisions of the EMC Directive 2004/108/EC, the CE Marking Directive 93/68 EEC and all associated amendments.
IMPORTANT SAFEGUARDS 1. READ AND RETAIN INSTRUCTIONS Read the instruction manual before operating the equipment. Retain the manual for future reference. 2. CLEANING Turn the unit off and unplug from the power outlet before cleaning. Use a damp cloth for cleaning. Do not use harsh cleansers or aerosol cleaners. 3.
Page 6
12. SERVICING Do not attempt to service the video monitor or equipment yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 13. DAMAGE REQUIRING SERVICE Unplug the equipment from the wall outlet and refer servicing to qualified service personnel under the Following conditions: A.
CONTENTS OF PACKAGE Installation of the camera must be performed by qualified service personnel in accordance with all local and national electrical and mechanical codes. Carefully remove the colour camera and its accessories from the carton and verify that they were not damaged in shipment. The content of the package includes: 1.
Adjusting Camera Module TACT SWITCH OPERATION/SERVICE JACK The tact switch allows both navigation and changes to the OSD Menu. To enter into the OSD menu push centrally on the joystick and navigate using the up, down, left and right actions. If there is an arrow to the right of the menu function, this denotes that there is an accessible sub menu function.
OSD MENU STRUCTURE EXPOSURE EXPOSURE COLOUR COLOUR DAY/NIGHT LENS WB MODE FUNCTION HBLC / DWDR R-Y GAIN MOTION B-Y GAIN PRIVACY 2D DNR SET UP SYSTEM DAY / NIGHT FUNCTION MOTION AUTO MIRROR AREA SEL COLOUR SHARPNESS SENSITIVITY B&W MONITOR DISPLAY EX-CDS GAMMA...
Page 13
D-WDR (Wide Dynamic Range) D-WDR level: 1 – 20 (increments of 1) (Helps to provide a more balanced image when the camera is looking at a highly contrasting scene of view e.g. reception area with external glass) AGC (Auto Gain Control) AGC: Off, Low, Mid, High (AGC is applied to the image in low light conditions to maintain the video level)
Page 14
Day>Night: 6 – 30 (in increments of 1) (The higher the number, the darker it needs to be before it switches to B&W) Night>Day: 7 – 30 (in increments of 1) (The higher the number, the brighter it needs to be before it switches to colour) Dwell time: 0 –...
MOTION DETECTION MOTION DETECTION – allows upto 4 areas of motion to be set up Motion: Off, On Area sel: Area 1 – 4 Mask mode: On, Off (User definable areas to apply to the image) Sensiti.: 0 – 30 (in increments of 1) (The lower the number the lower the sensitivity) Display: Off, Icon, Trace (Icon displays a blue figure in the top right corner.
Page 16
POS: moves the title around the image to a suitable position RET: takes you back to the menu Manual DPC: Off, Manual White THR: 0 – 255 (in increments of 1) Black THR: 0 – 255 (in increments of 1) DPC Level: 0 –...
EXIT Factory Set: No, Yes Save&Exit: Save and exit with changes made Exit: Exit without saving changes Defaulting the camera: In FACTORY SET, select ‘Yes’, click ‘enter’ on the tact switch, then Save&Exit LENS ADJUSTMENT Field of view: Adjust setting from Tele (T) to Wide (W) field of View.
SPECIFICATIONS VVRD28V12-760H MODEL DNLED Resolution 600TVL (colour and monochrome) 1/3″ SONY Super HAD (760H) Image sensor Total pixels 795 (H) x 595 (V) Scanning system 2:1 Interlace Scanning frequency PAL: 15.625KHz(H) x 50Hz(V) Sync. system Internal 1.0Vp-p (75Ω, composite) Video output S/N Ratio 50dB (AGC off) Lens...
Page 20
VVRD28V12-760H Manual / V1 / 2013-05-10 (This manual is subject to change without notice)