Table of Contents
Advertisement
3.2. Access from the internet
Access from the internet once connected, the Network Camera is accessible on your local network
(LAN). To access the network camera from the Internet you must configure your broadband router to
allow incoming data traffic to the network camera. To do this, enable the NAT-traversal feature, which
will attempt to automatically configure the router to allow access to the network camera. This is
enabled from Setup > System > Network > NAT.
For more information, please see "3.5.5 System>Network>NAT" of User's Manual.
3.3 Setting the admin password over a secure connection
To gain access to the product, the password for
the default administrator user must be set. This is
done in the "Admin Password" dialog, which is
displayed when the network
for the setup at the first time. Enter your admin
name and password, set by the administrator.
Note: The default administrator username is
admin and password is admin. If the password is
lost, the Network Camera must be reset to the
factory default settings. See "3.6 Resetting to the
Factory Default Settings".
3.4 Live View Page
The live view page comes in several
screen modes: 1600x1200, 1280x1024,
1280x720, 800x600, 704x480(576),
640x480, 352x240(288) and 320x240.
Users are allowed to select the most
suitable one out of those modes. Please,
adjust the mode in accordance with your
PC specifications and monitoring purposes.
1)
General controls
Live View Page
video stream on the live view page. Stream profiles are configured under Setup > Basic
Configuration > Video & Image. For more information, please see "3.5.1 Basic Configuration >
Video & Image" of User's Manual
is accessed
camera
Search & Playback Page
The video drop-down list allows you to select a customized or pre-programmed
Setup Page
11
Help Page
Advertisement
Table of Contents
