Table of Contents
Advertisement
4. PRIVACY
-. AREA SELECT: Select MAK area number.
-. AREA DISPLAY: Select MASK ON/OFF.
-. LEFT/RIGHT: Adjust the location of the MASK area with boundary LEFT and RIGHT.
-. WIDTH: Adjust width of MASK area.
-. TOP/BOTTOM: Adjust the location of the MASK area with boundary TOP and BOTTOM.
-. HEIGHT: Adjust the height of MASK area.
-. COLOR: Select MASK color. (0~15)
[PRIVACY MODE]
5. SYNC: Select Internal or Line Lock mode.
-. INT: This mode is necessary for using the internal synchronization.
-. L/L: This mode is necessary for the operation of multi camera because it synchronizes
the camera phase by using the external signal (AC Signal).
-. PAHSE: Sync phase is adjustable in line lock mode.
6. LANGUAGE : You can change the OSD language using the LEF/RIGHT Setup switch.
▶ ADJUST
1. SHARPNESS: Can be adjusted SHARPNESS of outlines. (0~31)
2. BLUE: Adjust B-GAIN value. (0~100)
3. RED: Adjust R-GAIN value. (0~100)
▶ PRESET
1. FACTORY: Returns to the level which was set by the manufacturer.
▶ EXIT
1. EXIT: Saves all the setting menus and then exits.
23
Advertisement
Table of Contents
