Table of Contents
Advertisement
3.6.5.3 Date & Time
• Current Server Time
It displays the current date and time (24h clock). The time can be displayed in 12h clock
format in the overlay (see below).
• New Server Time
Select your time zone from the drop-down list. If you want the server clock to
automatically adjust for daylight savings time, select "Automatically adjustment for
daylight saving time changes".
From the Time Mode section, select the preferred method to use for setting the time:
-. Synchronize with computer time - sets the time from the clock on your computer.
-. Synchronize with NTP Server - the VK2-540VRD will obtain the time from an NTP
server every 60 minutes.
-. Set manually - this option allows you to manually set the time and date.
Note: Note that if using a host name for the NTP server, a DNS server must be configured
under TCP/IP settings.
55
Advertisement
Table of Contents
