Table of Contents
Advertisement
▶ LENS (Selection)
This function is used to adjust the brightness of the screen.
1. When the SETUP menu is displayed on the screen, please position the arrow to point
to LENS by using the UP and DOWN buttons.
2. Please select the type of the lens you wish to use by pressing the LEFT or RIGHT
button.
Note: The brightness of the screen can be adjusted in DC mode.
The brightness can be adjusted within the range of 0 ~ 100.
The optimum level of brightness for the user can be achieved by adjustment.
▶ EXPOSURE
The EXPOSURE menu is used to set the automatic light control method for this camera.
-. SHUTTER:
Select the shutter mode. (1/60(50), FLK~1/100,000 sec, x2~x256)
Can be changed while in shutter mode.
-. BRIGHTNESS:
Adjust BRIGHTNESS level (0~100).
Can be changed while in manual lens mode.
-. AGC:
Auto gain control (OFF/LOW/MIDDLE/HIGH)
-. SENSE-UP:
Use under very light condition for full color surveillance.
Select maximum Low-Shutter value. (x2 ~ x256)
-. BLC:
Sharpness subjects with backlight. (OFF/BLC/HBLC)
-. D-WDR:
Digital wide dynamic range. (OFF/INDOOR/OUTDOOR)
19
Advertisement
Table of Contents
