Maintenance - Vista VK2-540VRD User Manual

3.6.5.6. Maintenance

• Maintenance Server
-. Restart - The unit is restarted without changing any of the settings. Use this method if
the unit is not behaving as expected.
-. Restore - The unit is restarted and most current settings are reset to factory default
values. The settings that are not affected are:
- the boot protocol (DHCP or static)
- the static IP address
- the default router
- the subnet mask
- the system time
-. Default - The default button should be used with caution. Pressing this will return all of
the VK2-540VRD 's settings to the factory default values (including the IP address).
• Update Server
Carry out the upgrade by importing an upgrade file and pressing the 'Upgrade' button.
During the upgrade, do not turn off the power of the VK2-540VRD. And try an access
again after waiting five minutes or longer.
• Backup
Save a setting value that users enter to the VK2-540VRD, to a user PC.
• Restore
Import and apply a setting value saved to a user PC.
Note: Backup and Restore can only be used on the same unit running the same firmware.
This feature is not intended for multi-configurations or for firmware upgrades.
66