Vista VK2-540VRD User Manual page 22

▶ SPECIAL
1. CAM TITLE
-. A CAM TITLE
-. B 0123456789ABCD
EFGHIJKLMNOPQRSTUVWXYZ
▶→←↑↓()−_▐ /=&:~,"
←→CLR POS END
-. C
2. D-EFFECT
-. FREEZE: Select the real or still mode.
-. MIRROR: Reverse the screen in 3 modes selection. (OFF/MIRROR/V FLIP/ROTATION)
-. D-ZOOM: D-Zoom (x2~x32) / Adjust PAN/TILT
-. GAMMA: Adjust the luminance. (0.05~1.00)
-. NEGA/POSI: Select the negative or positive mode.
3. MOTION
-. AREA SELECT: Select MD area number.
-. AREA DISPLAY: Select MD ON/OFF.
-. LEFT/RIGHT: Adjust the location of the MD area with boundary LEFT and RIGHT.
-. WIDTH: Adjust width of MD area.
-. TOP/BOTTOM: Adjust the location of the MD area with boundary TOP and BOTTOM
-. HEIGHT: Adjust the height of MD area.
-. SENSITIVITY: Adjust sensitivity of MD area. (0~40)
-. MOTION VIEW: The screen displays with green dots. When a motion is detected in
the selected area, the green dots are displayed on the screen.
: Camera Title
: Character Table
: ←, Move to left
:→, Move to right
: CLR, Erase all characters
: POS, Move the position of title
: END, Save and End
22