MakerBot Replicator User Manual page 17

sEtting up thE MakErbOt rEpLiCatOr
4 pLug in and pOWEr On
4a. Make sure the power switch
is in the off position.
4b. Locate the power cord and plug
it into the power input port at the back
of the MakerBot Replicator.
4c. Plug the power cord into
an electrical outlet.
Caution: The socket outlet must
be located near the equipment and
must be easily accessible.
4d. Switch the power on and press
the control panel dial.
17
GettinG started
Power on