Print - MakerBot Replicator User Manual

print

Select the Print icon to initiate a print stored on a USB flash drive or on your 3D printer's
internal storage.
1 sELECt a fiLE
Turn the dial to scroll through the list of
available locations. Push the dial to select
the location of the file you want to print.
Select usb storage to print a file stored on
a USB drive inserted into the USB port.
Select internal storage to print a file stored
on the MakerBot Replicator. The internal
storage has a capacity of about 2 GB.
Select your Library to print a sliced file from your MakerBot Cloud Library. In the Library menu:
• Choose all things to access every item synced to your MakerBot Replicator
•
from your Library.
• • Choose My designs for private files synced from your MakerBot Cloud Library.
• Choose thingiverse for items from your MakerBot Thingiverse™ collections.
•
• Choose purchased for files purchased from the MakerBot Digital Store.
•
Press the dial to select a location. Turn the dial to scroll through the list of available files and
press it again to select one.
36
the control panel