Hitachi TM3000 Instruction Manual page 191

(4) Magnification
NOTE : The magnification shown in the information area is indicated in an [xMMM] format.
A magnification greater than 1000 is represented by xM.Mk, and a value greater
than 10000 by xMMk.
This screen sets the Show/Hide of the magnification in the information field. Placing a
checkmark on Observation Magnification imprints the magnification used during the image
capture on the saved image (Save Image type: other than Image Only).
(5) Image Number Specifies show/hide for the image number. Placing a checkmark on
the image number imprints the image number of capture on the saved image (Save Image
type: other than Image Only).
The image number consists of [title + auto increment]. Placing a checkmark on Auto
Increment shows a number, which is incremented during capture. Numbers can be set in a
0000 to 9999 range. In Title, up to 10 half-width alphanumeric characters can be entered.
1b. Input Comment
Specifies show/hide for the comments in the Comments area. Placing a checkmark on the
comments imprints the comments on the saved image (Save Image type: image +
information + comments). Up to 30 full-width characters can be entered.
Figure 4.3.25-4 Comment Entry Block
4 - 78