Upgrade For Tm3000 Application - Hitachi TM3000 Instruction Manual

2.4.2 Upgrade for TM3000 Application

Clicking [Upgrade for TM3000 application] from main menu of TM3000 Setup disk, following
window is displayed.
Figure 2.4.2 Upgrade for TM3000 Application
Use this function for Upgrade the TM3000 application program or Instruction manual. When
TM3000 application program is installed already, it can be use. It cannot be used for
downgrade.
1. Backup of system files Backup the system files maintaining it in a PC temporarily.
System files are made in [TM3000_Backup] folder on desktop.
*Backup the system files, before upgrading the TM3000 application.
2. Upgrade of application program Upgrade (Repair) of application program is possible.
When installing the application of the version that is newer than the application that was
already installed, can be Upgrade by using a TM3000 Setup Tools.
When installing the application of the version that is same as the application that was already
installed, can be [Repair] by using a TM3000 Setup Tools.
*Upgrade procedures of an application please refer to [2.3.1 Upgrade of an Application].
3. Upgrade of the instruction manuals Upgrade (Repair) of Instruction manual is
possible.
When installing the Instruction manual of the version that is newer than the Instruction
manual that was already installed, can be Upgrade by using a TM3000 Setup Tools.
When installing the Instruction manual of the version that is same as the Instruction manual
that was already installed, can be [Repair] by using a TM3000 Setup Tools.
2 - 70