Installing The Usb Driver Software - Hitachi TM3000 Instruction Manual

2.2.5 Installing the USB Driver Software

Installing the USB software has to be done after having installed a TM3000 application
program.
1. With a USB cable, connect the system main unit to the PC. Keep turning off the system
of main unit.
USB cable PC
Main unit
Figure 2.2.5-1 Connecting the Main Unit to the PC
2. Turn on the system main unit. The Plug-and-Play feature of the PC recognizes the USB
device, and displays the following message for a few seconds in the lower part of the window.
Figure 2.2.5-2 Main Unit Connection Verification Message
3. When the installation of the USB device driver is completed, the following messages are
displayed.
Figure 2.2.5-3 Main Unit Connection Verification Message
2 - 18