Deleting Speed-Dial Entries; Assigning Speed-Dial Entries To Programmable Buttons - Mitel 5312 User Manual

Deleting Speed-Dial Entries

To delete a Station Speed-Dial entry:

Assigning Speed-Dial Entries to Programmable Buttons

You can assign Station or System Speed-Dial numbers to your programmable buttons.
To program a System/Station Speed-Dial button:
Mitel ® 5312/5324 IP Phone User Guide – Issue 1, September 2009
1. With the handset on-hook, dial 383. PROGRAM STN SPD (0-9) OR SCROLL appears.
2. Do one of the following:
•
Press (Up) or
•
Enter the speed-dial location (0 to 9).
3. Press # to select the location.
4. Press (Hold) repeatedly until the name is erased, and then press # to continue.
5. Press (Hold) repeatedly until the number is erased, and then press #. STN SPD
BIN # <number> UPDATED appears.
Before assigning the speed-dial number to a programmable button, make sure the
NOTE
number has either a Station or System Speed-Dial code assigned to it.
1. With the handset on-hook, dial 397. PRESS THE BUTTON TO PROGRAM appears.
2. Press the feature button that you want to program as a speed-dial button.
3. Dial 382 (Station Speed Dial) or 381 (System Speed Dial).
4. Do one of the following:
• Press (Up) or
•
Enter the speed-dial location (0 to 9 for Station Speed-Dial or 000 to 999 or 0000 to
4999 for System Speed Dial).
(Down) to scroll through the speed-dial locations.
(Down) to scroll through the speed-dial locations.
Answering and Placing Calls
Page 25