Deleting Speed-Dial Entries; Assigning Speed-Dial Entries To Programmable Buttons - Mitel 50005070 User Manual

Deleting Speed-Dial Entries

To delete a Station Speed-Dial entry:
1. With the handset on-hook, dial 383. PROGRAM STN SPD (0-9) OR SCROLL appears.
2. Do one of the following:
3. Press # or the ACCEPT menu button (Model 5340 only) to select the location.
4. Press
5. Press

Assigning Speed-Dial Entries to Programmable Buttons

You can assign Station or System Speed-Dial numbers to your programmable buttons.
NOTE
To program a System/Station Speed-Dial button:
1. With the handset on-hook, dial 397. PRESS THE BUTTON TO PROGRAM appears.
2. Press the feature button that you want to program as a speed-dial button.
3. Dial 382 (Station Speed Dial) or 381 (System Speed Dial).
4. Do one of the following:
Mitel ® Model 5330/5340 User Guide – Issue 2, October 2008
•
Press (Up) or
•
Enter the speed-dial location (0 to 9).
(Hold) repeatedly until the name is erased, and then press # or the
ACCEPT menu button (Model 5340 only) to continue.
(Hold) repeatedly until the number is erased, and then press # or the
ACCEPT menu button (Model 5340 only). STN SPD BIN # <number> UPDATED
appears.
Before assigning the speed-dial number to a programmable button, make sure the
number has either a Station or System Speed-Dial code assigned to it.
•
Press (Up) or
•
Enter the speed-dial location (0 to 9 for Station Speed-Dial or 000 to 999 or 0000 to
4999 for System Speed Dial), or select the menu button designation from the
display (Model 5340 only).
Answering and Placing Calls
(Down) to scroll through the speed-dial locations.
(Down) to scroll through the speed-dial locations.
Page 23