Bios Update - HighPoint RocketRAID 600L User Manual

8 BIOS Update

The BIOS update utility must be run while the system is operating in a pure DOS environment. The update
utility cannot be run from a DOS-prompt window.
1. Visit the www.highpoint-tech.com website to download the latest firmware.
2. Extract the download to a bootable DOS USB drive.
3. Boot the system using the bootable USB drive.
4. At the command prompt, access the BIOS update's directory:
5. The following command line is used to launch the flash utility:
load.exe
6. After the BIOS has been successfully updated, the following information will be displayed:
36