HighPoint RocketRAID 600L User Manual page 15

available capacity will be displayed. Press Enter key if you wish to use all available space. If you wish to
reserve disk space for additional arrays/single disks, use the keyboard to input the amount of space (in
GB) you wish to set aside for this particular array, and press Enter key.
Note: Multiple arrays can be created using the same set of hard disk drives. The Capacity option
allows you to set aside disk space that be used to create another array, set as a spare disk, or
partitioned to act as a single disk (by the operating system).
6. For redundant RAID arrays (RAID 5, 50), select the Cache Policy:
Write Back – Provides higher write performance for redundant RAID arrays. Data is at risk when there
is a power failure, system kernel panic and un-responding abnormal conditions.
Write Through – Writes directly to the disks (may reduce the risk of data loss during a critical failure,
but at the cost of lower performance).
15