Table of Contents
Advertisement
6.4.3
IP Filtering
This option is not available for bridge mode.
IP filtering allows you to create a filter rule to identify outgoing/incoming IP traffic
by specifying a new filter name and at least one condition below. All of the specified
conditions in this filter rule must be satisfied for the rule to take effect. Click
'Save/Apply' to save and activate the filter.
Note: After you enable the "Firewall", you can set the "IP filter". If firewall is
disabled, you cannot set the IP filter.
Outgoing
Note: The default setting for all Outgoing traffic is Accepted.
To add a filtering rule, simply click the Add button. The following screen will be
displayed.
63
Advertisement
Table of Contents
