Table of Contents
Advertisement
6.2
LAN
Configure the VoIP IAD IP Address and Subnet Mask for LAN interface. Save button
only saves the LAN configuration data. Save/Reboot button saves the LAN
configuration data and reboots the IAD to make the new configuration effective.
IP Address: Enter the IP address for the LAN port.
Subnet Mask: Enter the subnet mask for the LAN port.
Enable UPnP: Tick the box to enable.
Note: This option will not display in Bridge mode or if no PVC is configured.
Enable IGMP Snooping: Enable IGMP Snooping function by ticking the box.
Standard Mode: In standard mode, as in all prior releases, multicast traffic will
flood to all bridge ports when there is no client subscribes to any multicast group –
even when IGMP snooping is enabled.
Blocking Mode: In blocking mode, the multicast data traffic will be blocked and not
flood to all bridge ports when there is no client subscription to any multicast group.
To configure a secondary IP address for the LAN port, click the box as shown below.
52
Advertisement
Table of Contents
