Comtrend Corporation CT-6382T User Manual page 41

5. Upon completion, click Next. The following screen appears.
The Device Setup page allows the user to configure the LAN interface IP address and
DHCP server. If the user would like this VoIP IAD to assign dynamic IP addresses,
DNS server and default gateway to other LAN devices, select the radio box Enable
DHCP server to enter the starting IP address and end IP address and DHCP lease
time. This configures the IAD to automatically assign IP addresses, default
gateway address and DNS server addresses to each of your PCs.
Note that the IAD's default IP address is 192.168.1.1 and the default private
address range provided by the DHCP server in the IAD is 192.168.1.2 through
192.168.1.254.
Note: The Ethernet interface (and the wireless LAN interface on the CT-6382T)
share the same subnet since they are bridged within the IAD.
Select Enable DHCP Server Relay (if required), and enter the DHCP Server IP
Address. This allows the Router to relay the DHCP packets to the remote DHCP
server. The remote DHCP server will provide the IP address.
40