Table of Contents
Advertisement
•
RTP
Port Number (Min): The RTP-pool lower range
Port Number (Max): The RTP-pool upper range
•
CallAgent
Domain Name/Port Number: The Call agent domain name type and port number
IP Address/Port Number: The Call agent IP address type and port number
Preferred codec: The preferred codec of this user. The default is Auto first.
FAX mode: Use G711u (Pass-through) or T.38 when sending a fax.
PSTN routing rule: If PSTN route rule is "auto" , when a PSTN call coming will ring
the idle phone(phone1 idle ring phone1,phone1 busy ring phone2)
PSTN routing data: If PSTN route rule is "fix", when a PSTN call coming will ring
the phone that the user selects from PSTN route data (phone1 OR phone2)
Saving Configuration: To save a new configuration, first click Stop MGCP client.
Then, click Start MGCP client. The configuration will be saved. We recommend that
you save and reboot the unit to enable the new configuration.
Note 1:
You can assign the call agent as IP address type or Domain Name type. If you
choose IP address type, every time you restart the machine, the gateway will
send a RSIP to this IP address. If you choose Domain Name type, every time you
restart the machine, the gateway will do a DNS lookup until it receives a valid IP
address translation from the DNS server, and then it will send RSIP to this IP
address.
Note 2:
If you choose Domain Name type, the IP address field will display the DNS
lookup result automatically.
101
Advertisement
Table of Contents
