Table of Contents
Advertisement
5. To enable the wireless function, select the box (by clicking on it) and input the
SSID. Then, click Next.
6. Click Next to display the WAN Setup-Summary screen that presents the entire
configuration summary. Click Save/Reboot if the settings are correct. Click
Back if you wish to modify the settings.
7. After clicking Save/Reboot, the VoIP IAD will save the configuration to the flash
memory, and reboot. The Web UI will not respond until the system is brought up
again. After the system is up, the Web UI will refresh to the Device Info page
automatically. The CT-6382T is ready for operation and the LEDs display as
described in the LED description tables.
37
Advertisement
Table of Contents
