ZXR10 8900 Series User Manual (Ethernet Switching Volume)
St-
Command
ep
1
ZXR10(config)#
2
ZXR10(config)#
3
ZXR10(config-vlan)#
4
ZXR10(config)#
22
Confidential and Proprietary Information of ZTE CORPORATION
Create session 2, configure egress enhanced VLAN translation,
translate single tag message with vlan 10 imported from gei_1/1
into vlan 100 and add outer tag 200.
ZXR10(config)#vlan translate enhanced session-no 1 ingress-port
gei_1/1 ingress-vlan 10 egress-invlan 100 egress-outvlan 200
ZXR10(config)#vlan translate enhanced session-no 3 egress-port
gei_1/1 ingress-vlan 10 egress-invlan 100 egress-outvlan 200
Create session 3, configure entry enhanced VLAN translation,
translate double-layer tag message with inner VLAN 10 and outer
VLAN 20 imported by gei_1/1 into inner VLAN 100 and outer
VLAN 200 .
Create session 4, configure egress enhanced VLAN translation,
translate double-layer tag message with inner VLAN 10 and outer
VLAN 20 imported by gei_1/1 into inner VLAN 100 and outer VLAN
200 .
ZXR10(config)#vlan translate enhanced session-no 3 ingress-port
gei_1/1 ingress-invlan 10 ingress-outvlan 20 egress-invlan 100
egress-outvlan 200
ZXR10(config)#vlan translate enhanced session-no 3 egress-port
gei_1/1 ingress-invlan 10 ingress-outvlan 20 egress-invlan 100
egress-outvlan 200
When realizing the above seven functions by command configura-
tion, for imported single layer tag message, if only add outer tag,
configure the value of egress-invlan same as that of ingress-vlan.
For imported double-layer tag message, if only need to modify
one of them, configure another translated tag same as the vlaue
before translation. If need to delete outer tag, set the value of
egress-outvlan as untag.
Configuring SuperVLAN
interface supervlan <supervlan-id>
vlan <vlan-id>
supervlan <supervlan-id>
interface supervlan <supervlan-id>
Function
This creates SuperVLAN and
supervlan-id ranges from 1 to
255.
This enters VLAN
configuration mode.
This adds sub-vlan (Utmost
4094 subvlans can be
bound to one SuperVLAN.
The sub-vlan that has
been configured with l3
interface cannot be bound to
SuperVLAN.)
This enters Supervlan
interface configuration mode
and supervlan-id ranges from
1 to 255.