Zte ZXR10 8900 Series User Manual page 153

Chapter 12 Configuring One-command for Collection Function
3. no exec file is used to cancel the timing implementation con-
figuration which has been in the system. If the time need to
be reset, this command need to be carried out for the next
configuration can pass the check.
Echo description:
If the command format is correct, some kinds of echo states will
appear as follows:
Echo state 1:
ZXR10(config)#exec file zerodispo.dat
This command will take a long time,please wait......
It indicates that system has received this one-command for config-
uring on random time( that is , the one-command for configuring
without timing option) and prompts that this operation will last for
a period and request wait.
Echo state 2:
ZXR10(config)#exec file zerodispo.dat
Exec file is still running,please wait......
It indicates that system has been in the process of one-command
for configuring ( maybe exec file is carried out on the other ter-
minals), user can't carry out one-command for configuring at this
time and need to carry out later.
Echo state 3:
ZXR10(config)#exec file dasfkl
This command will take a long time,please wait......
ZXR10(config)#
Now exec file is running...No /flash/cfg/dasfkl found!
It indicates that user designates the wrong file and system can't
find the configuration file to be carried out.
Echo state 4:
ZXR10(config)#show exec-cmd-file
Command file zerodispo.dat will be run at 19:00:00 Sun Sep 27 2009 UTC.
ZXR10(config)#exec file zerodispo.dat 15:00:00 sep 28 2009
Exec file timer has been set successfully!
The former command show exec-cmd-file is used to display the
timing configuration information that system has, if this timing
time has expired, the new timing configuration will cover the for-
mer one, so that system will implement according to the latest
timing time.
Echo state 5:
ZXR10(config)#show exec-cmd-file
Command file zerodispo.dat will be run at 15:00:00 Mon Sep 28 2009 UTC.
ZXR10(config)#exec file zerodispo.dat 15:00:02 sep 28 2009
%Code 99: The timer has been setted!
System can't set the new time before reaching the configured time.
It need to use no exec file on the configuration mode to cancel the
original time for resetting the time.
Echo state 6:
ZXR10(config)#exec file zerodispo.dat
Write is running,you can't show configuration or diagnostic
information!
It indicates that maybe there is another terminal carrying out exec
file and being in the write configuration status, at this time, an-
other exec file can't be carried out.
Confidential and Proprietary Information of ZTE CORPORATION 141