Cfm Maintenance And Diagnosis - Zte ZXR10 8900 Series User Manual

TimeDelay: 0
TimeDelayAverage: 0
TimeDelayIntervalAverage: 0
Two-DM state: enable
TimeDelay: 0
TimeDelayAverage: 0
TimeDelayIntervalAverage: 0
DefXconCCM:0
DefErrorCCM:0
DefRemoteCCM:0
DefRDICCM:0
MP session 62
type: remote mep
mep id: 2
ccm check state: disable
remote mac: 00d0.d052.2800
DefRemoteCCM:0
DefRDICCM:0
3. Two-lm function is enabled on two switches.
Networking diagram and configuration method of two-lm are
the same as those of two-dm . Just replace two-dm commands
with two-lm related commands.

CFM Maintenance and Diagnosis

Command
show MD {all | session
ZXR10(config)#
<session-id>}
show MA {all | session
ZXR10(config)#
<MA-session-id>} MD <MD-session-id>
show MEP {mep-id | all}
ZXR10(config)#
MD <MD-session-id> MA <MA-session-id>
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 9 Ethernet OAM Configuration
0
0
0
534
521
30
Function
This shows MD
configured on device.
This shows MA
configuration.
This shows MEP
configuration.
107