Command
set ethernet-oam
ZXR10(config)#
link-monitor symbol-period threshold
<165535> window <165535>
9. To configure interface error frame link event parameter, use
the following command.
St-
Command
ep
1
ZXR10(config)#
<portname>
2
ZXR10(config-if)
link-monitor frame threshold
<165535> window <160>
10. To configure interface error frame period link event parameter,
use the following commands.
St-
Command
ep
1
ZXR10(config)#
<portname>
2
ZXR10(config-if)#
link-monitor frame-period
threshold <1 65535> window
<1 600000>
11. To configure interface error frame second count link event pa-
rameter, use the following commands.
St-
Command
ep
1
ZXR10(config)#
<portname>
2
ZXR10(config-if)#
link-monitor frame-seconds
threshold <1 900> window
<10 900>
12. To clear configuration or statistics data, use the following com-
mand.
St-
Command
ep
1
ZXR10(config)#
{ all |statistic }
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 9 Ethernet OAM Configuration
interface
set ethernet-oam
interface
set ethernet-oam
interface
set ethernet-oam
clear ethernet-oam
Function
This configures
interface error symbol
link event parameter.
Function
This enters interface
configuration mode.
This configures
interface error
frame link event
parameter.
Function
This enters interface
configuration mode.
This configures
interface error frame
period link event
parameter.
Function
This enters interface
configuration mode.
This configures
interface error frame
second count link
event parameter.
Function
This clears
configuration or
statistics data.
89