Table of Contents
Advertisement
6.5
All fans are shipped from the factory with the reversing
switch positioned to circulate air downward.
6.6
If airflow is desired in the opposite direction, turn the
fan off and wait for the blades to stop turning. Then
slide the reversing switch, located on top of the fan
motor assembly, to the opposite position (Figure 20)
and turn the fan on again. The blades will turn in the
opposite direction and reverse the airflow.
Reverse Switch Information
Season
Rotation Direction
Summer
Counter-Clockwise
Winter
Clockwise
7.1
Your Emerson Ceiling Fan/Light Control consists of wall
mounted transmitter and a receiver which is mounted
under the fan ceiling cover. The remote control is
designed to separately control your ceiling fan speed
and light intensity.
Code switches in the transmitter and receiver may be
set in 32 different positions. If your fan and light go on
and off without using your control, you may be getting
interference from other remote units such as garage
door openers, car alarms or security systems. To
remedy this situations, simply change the combination
code in your transmitter and receiver.
6. Final Assembly
Switch Position
Right
Left
7. Wall Control Procedures
(continued)
Figure 20
Please
call
Emerson
1-800-654-3545 if you have any questions
about installation and operation of this ceiling fan.
7.2
Preset Memory Feature: Your Emerson receiver is
equipped with a preset memory feature. If the AC
supply to the receiver is powered through a wall switch,
when the switch is turned OFF, the control will
remember the light intensity and fan speed. When the
switch is turned back ON the light and fan will resume
operation as they were prior to the switch being turned
OFF.
Please contact 1-800-654-3545 for further assistance
13
REVERSING
SWITCH
technical
support
at
emersonfans.com
ETL Model No.: CF890
Advertisement
Table of Contents
