Chapter 6 Introduction
If you want to completely disassemble the ARK-3382 embedded box
computer, follow the step-by-step procedures below. Users should be
aware that Advantech Co., Ltd. takes no responsibility whatsoever for
any problems or damage caused by the user disassembly of the ARK-
3382 embedded box computer. Make sure the power cord of the ARK-
3382 embedded box computer is unplugged before you start disassembly.
The following procedures do not include the detailed disassembly proce-
dures for the HDD, Compact Flash Disk and SRAM; all of which can be
found in Chapter 3.
1. Unscrew the 2 screws on the bottom side
2. Unscrew the screws of the frame bracket on the front side of system
ARK-3382 User Manual
Figure 6.1:
Figure 6.2:
52