Page of 294
Download Print This PagePrint Bookmark Comment

HP Q.11. (2510-24) Access Security Manual: Retention Of Static Mac Addresses; Displaying Current Port Security Settings

Procurve 2510 series.
Hide thumbs

Advertisement

Configuring and Monitoring Port Security
Port Security Command Options and Operation
9-10

Retention of Static MAC Addresses

Learned MAC Addresses
In the following two cases, a port in Static learn mode (learn-mode static)
retains a learned MAC address even if you later reboot the switch or disable
port security for that port:
The port learns a MAC address after you configure the port with learn-
mode static in both the startup-config file and the running-config file
(by executing write memory).
The port learns a MAC address after you configure the port with learn-
mode static in only the running-config file and, after the address is
learned, you execute write memory to configure the startup-config file
to match the running-config file.
Assigned/Authorized MAC Addresses
If you manually assign a MAC address (using mac-address < mac-addr >) and
then execute write memory, the assigned MAC address remains in memory
unless removed by one of the methods described below.
Removing Learned and Assigned Static MAC Addresses
To remove a static MAC address, do one of the following:
Delete the address by using no port-security < port-number > mac-
address < mac-addr >.
Download a configuration file that does not include the unwanted
MAC address assignment.
Reset the switch to its factory-default configuration.
Displaying Current Port Security Settings
The CLI uses the same command to provide two types of port security listings:
All ports on the switch with their Learn Mode and (alarm) Action
Only the specified ports with their Learn Mode, Address Limit, (alarm)
Action, and Authorized Addresses

Advertisement

   Related Manuals for HP Q.11. (2510-24)

Comments to this Manuals

Symbols: 0
Latest comments: