HP Q.11. (2510-24) Access Security Manual page 158

Configuring Secure Shell (SSH)
Further Information on SSH Client Public-Key Authentication
N o t e o n P u b l i c
K e ys
6-26
Copying a client-public-key into the switch requires the following:
■ One or more client-generated public keys. Refer to the documentation
provided with your SSH client application.
A copy of each client public key (up to ten) stored in a single text file
■
or individual on a TFTP server to which the switch has access.
Terminate all client public-keys in the file except the last one with a
<CR><LF>.
The actual content of a public key entry in a public key file is determined by
the SSH client application generating the key. (Although you can manually
add or edit any comments the client application adds to the end of the key,
such as the smith@fellow at the end of the key in figure 6-14 on page 6-24.)
Syntax: copy tftp pub-key-file <ip-address> <filename> [<append | manager |
operator>]
Copies a public key file from a TFTP server into flash
memory in the switch.
The append option adds the key(s) for operator access.
The manager option replaces the key(s) for manager
access; follow with the append option to add the key(s).
The operator option replaces the key(s) for operator
access (default); follow with the append option to add
the key(s).
show crypto client-public-key [manager | operator] [keylist-str] [babble |
fingerprint]
Displays the client public key(s) in the switch's current
client-public-key file.
The manager option selects the manager public keys.
The operator option selects operator public keys.
The keylist-str option allows you to select keys to display
(a comma-delimited list).
The babble option converts the key data to phonetic
hashes that are easier for visual comparisons.
The fingerprint option converts the key data to hexadec-
imal hashes that are for the same purpose.