Need Only A Quick Start; Ip Addressing - HP Q.11. (2510-24) Access Security Manual

Getting Started

Need Only a Quick Start?

Figure 1-3. Getting Help in the CLI
1-8
For information on a specific command in the CLI, type the command
■
name followed by "help". For example:
■ For information on specific features in the Web browser interface,
use the online help. For more information, refer to the Management
and Configuration Guide for your switch.
For further information on ProCurve Networking switch technology,
■
visit the ProCurve Networking Website at:
www.procurve.com

Need Only a Quick Start?

IP Addressing

If you just want to give the switch an IP address so that it can communicate
on your network, or if you are not using multiple VLANs, ProCurve
recommends that you use the Switch Setup screen to quickly configure IP
addressing. To do so, do one of the following:
Enter setup at the CLI Manager level prompt.
■
ProCurve# setup
Or, run the Menu interface and select 8. Run Setup from the Main Menu.
■
For more on using the Switch Setup screen, see the Installation and Getting
Started Guide you received with the switch.