Configuring And Monitoring Port Security; Overview; Basic Operation - HP Q.11. (2510-24) Access Security Manual

Configuring and Monitoring Port Security

Overview

N o t e
N o t e
9-2

Overview

Port security is not available on ports running at 10 Mbps or the 1000 Mbps
uplinks. It is only available on ports running at 100 mbps.
Feature
Displaying Current Port Security n/a
Configuring Port Security
Intrusion Alerts and Alert Flags
Using Port Security, you can configure each switch port with a unique list of
the MAC addresses of devices that are authorized to access the network
through that port. This enables individual ports to detect, prevent, and log
attempts by unauthorized devices to communicate through the switch.
This feature does not prevent intruders from receiving broadcast and multi-
cast traffic.

Basic Operation

Default Port Security Operation. The default port security setting for
each port is off, or continuous. That is, any device can access a port without
causing a security reaction.
Intruder Protection. A port that detects an "intruder" blocks the intruding
device from transmitting to the network through that port.
Default Menu CLI
— page 9-10
disabled — page 9-12
n/a page 9-24 page 9-22
Web
page 9-17
page 9-17
page 9-25