HP Q.11. (2510-24) Access Security Manual page 35

Reset Button
Pressing the Reset button alone for one second causes the switch to reboot.
Reset
Figure 2-6. Press and hold the Reset Button for One Second To Reboot the Switch
Restoring the Factory Default Configuration
You can also use the Reset button together with the Clear button (Reset+Clear)
to restore the factory default configuration for the switch. To do this:
1. Press and hold the Reset button.
Reset
2. While holding the Reset button, press and hold the Clear button.
Reset
Configuring Username and Password Security
Clear
Clear
Clear
Front-Panel Security
2-9