Trunk Configuration; Modifying Trunk Settings - HP J9079A Management And Configuration Manual

Web – Click Trunks, Membership. To assign a port to a trunk, click the required
trunk number, then click APPLY.

Trunk Configuration

You can use the Trunk Configuration page to manually set the speed, duplex
mode, and flow control.

Modifying Trunk Settings

1. On the Trunks Configuration page, modify any of the following settings:
• Speed Duplex – Allows auto-negotiation to be enabled or disabled.
When auto-negotiation is disabled, you can force the settings for
speed, duplex mode, and flow control.
• Flow Control – Allows automatic or manual selection of flow control.
2. Click APPLY.
Using the ProCurve Web Browser Interface
Web Configuration
2-19