Table of Contents
Advertisement
Web Configuration
Displaying System Information
You can display a complete summary of identity, IP Address, port, Trunk/LACP,
and VLAN information for the switch.
Field Attributes
System Identity
•
System Name – Name assigned to the switch system.
•
System Location – Description of the switch location.
•
System Contact – Contact information assigned to the switch.
•
Number of Ports – Number of built-in ports.
•
Hardware Version – Hardware version of the main board.
•
Software Version – Version number of the code.
•
Serial Number – The serial number of the switch.
Address Information
•
Management VLAN – ID of a configured VLAN. By default, all ports
on the switch are members of VLAN 1. However, the management
station can be attached to a port belonging to any VLAN, as long as
that VLAN has been assigned an IP address.
•
IP Address – Address of the VLAN to which the management station
is attached. (Note that the management station must always be in the
Management VLAN.)
•
Subnet Mask – This mask identifies the host address bits used for
routing to specific subnets. (Default: 255.255.255.0)
•
Gateway IP Address – IP address of the gateway router between the
switch and management stations that exist on other network
segments. (Default: 0.0.0.0)
•
MAC Address – The physical layer address of the switch.
Port Information
•
Port – Indicates the port number.
•
Type – Indicates the port type (10/100-T, 10/100/1000-T, or M).
•
Link Status – Indicates if the link is Up or Down.
Using the ProCurve Web Browser Interface
Web Configuration
2-5
Hide quick links:
Advertisement
Table of Contents
