Restore To Factory Defaults - HP J9079A Management And Configuration Manual

Restore to Factory Defaults

This operation allows you to either restore the switch back to the original
factory default configuration, or to clear all configuration information except
the IP Address, Subnet Mask and Gateway IP Address (see the SYSTEM > IP
Address page).
Field Attributes
• Restore Entire Factory Default Configuration – Restore the
switch to the original factory default configuration.
• Keep Current IP Address Only – Restore the switch to the original
factory default configuration, except for the IP Address, Subnet Mask
and Gateway IP Address.
Web – Click Diagnostics, Factory Defaults.
Using the ProCurve Web Browser Interface
Web Configuration
2-35