HP J9079A Management And Configuration Manual page 14

Using the ProCurve Web Browser Interface
Navigating the Web Browser Interface
Menu
TRUNKS
VLANS
LLDP
SNMP
DIAGNOSTICS
SUPPORT
LOGOUT
N o t e
The ProCurve Switch 1700 supports pass through (flooding) of spanning tree
BPDUs so that upstream devices on the network which support Spanning Tree
Protocol can detect loops that exist on the ProCurve Switch 1700 interface.
2-4
Description
Membership Selects ports to group into static trunks.
Configuration Configures static trunk connection settings.
LACP Setup Configures Link Aggregation Control Protocol (LACP) on
the switch.
LACP Status Displays aggregation information and LACP port status. 2-23
VLAN Setup Create up to 64 VLANs.
VLAN Port Config Configures VLAN behavior for individual ports and
trunks.
Configuration Configures Transmitted TLVs settings and LLDP state.
Neighbor Monitors LLDP neighbor information.
Configuration Configures the Simple Network Management Protocol. 2-33
Ping Test Sends a ping to other devices from the switch.
Factory Defaults Force the switch to perform a power reset and restore
the original factory settings.
Reboot Switch Reboots the switch.
Configuration File Upload or download the switch configuration file.
Update Software Updates the switch system software using a file
provided by ProCurve Networking.
ProCurve Web Site Link to ProCurve Networking Web site.
Quits to the Login page.
Page
2-16
2-16
2-19
2-20
2-25
2-25
2-27
2-30
2-30
2-32
2-33
2-33
2-33
2-35
2-36
2-36
2-36
2-38
2-39