Sources For More Information; To Set Up And Install The Switch In Your Network - HP J9079A Management And Configuration Manual

Sources for More Information

To Set Up and Install the Switch in Your Network

Use the Installation and Getting Started Guide shipped with your switch for
the following:
■ Instructions for physically installing the switch in your network.
Quickly assigning an IP address, subnet mask, and gateway, set a
■
Manager password, and (optionally) configure other basic features.
■ Interpreting LED behavior.
■ Notes, cautions, and warnings related to installing and using the
switch.
For the latest version of the Installation and Getting Started Guide and other
documentation for your switch, visit the ProCurve Networking Web site.
(Refer to "Getting Documentation From the Web" on page 1-2.)
Getting Started
Sources for More Information
1-3