HP J3178A Hardware Installation Manual page 72

Management module
Table of Contents

Advertisement

Monitoring Switch Operation From the Console
Event Log
The event log holds up to 100 lines in chronological order, from the oldest to
the newest. Each line consists of one complete event message. Once the log
has received 100 entries, it discards the current oldest line each time a new
line is received. The event log window contains 20 lines and can be positioned
to any location in the log.
The log status line at the bottom of the display identifies where in the sequence
of event messages the display is currently positioned.
The event log will be erased if any of the following occurs:
(The event log is not erased by using the Reboot Switch command in the
console Main Menu.)
5-14
The switch is reset by using the Reset button on the Switch Management
Module.
Power to the switch is interrupted, or the power is cycled.
A new operating system is downloaded to the switch.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Advancestack 208Advancestack 224

Table of Contents