Installing The Management Module - HP J3178A Hardware Installation Manual

Installing the Management Module

The HP J3178A AdvanceStack Switch 208/224 Management Module is installed
into the front of the HP AdvanceStack Switch 208T or 224T.
In this manual, this module will be called the Switch Management Module.
Figure 1-1. The Switch 208/224 Management Module
When installed, the Switch Management Module adds these features to your
switch:
This chapter shows you how to install your Switch Management Module.
Active
Base MAC Address
Access to the switch console from which you can configure, monitor, and
troubleshoot the switch
Access to the switch from SNMP network management programs, such
as HP AdvanceStack Assistant, for controlling the switch using an
advanced, graphics-based interface
Configurable full-duplex port operation
Configurable support for the Spanning Tree Protocol for switched
networks
Configurable MAC Address Table aging
Installing the Management Module
Switch Management Module
1
1-1