HP J3178A Hardware Installation Manual page 106

console RS-232
configuration of ... 4-16
description ... 2-2
copyright screen
displaying ... 3-6
crash information
when it displays ... 3-6
customer support services ... 7-9
D
date format
for event log ... 5-12
date parameter
setting ... 4-4
DEFAULT_CONFIG
about this prompt ... 3-17
as system name ... 4-4
delete password protection
meaning of ... 3-14
DHCP
how it is supported ... 4-10
diagnostic tests ... 7-4
testing the ports and links ... 7-5
testing the Switch and Management
Module ... 7-4
down time
where displayed ... 3-6
Download Manager
how to use ... C-4
download OS (operating system)
and event log ... 5-14
configuration to a PC ... C-8
prerequisites for IP and IPX ... C-2
switch to switch ... C-4
using Download Manager ... C-4
using TFTP ... C-2
using Zmodem from a PC ... C-5
E
EASE
description of ... 6-4
enabling a port
how to ... 5-4
ending a console session ... 3-7
4 – Index
event log
controlling what displays there ... 4-16
description of ... 5-12
entering and navigating ... 5-13
for display of traps ... 4-14
how configuration reset affects it ... 7-7
meaning of severity code ... 5-12
why it clears ... 5-14
exiting from command prompt ... 3-17
F
factory default configuration
description ... 4-1
for spanning tree ... 4-1
resetting back to ... 7-7
failure
of OS download ... C-6
of self test, indications ... 7-2
Fault LED
description of ... 2-2
description of states ... 7-2
features, Switch Management Module
in detail ... 2-3
summary of ... 1-1
file transfers
configuration ... C-8
how to ... C-1
OS ... C-1
format
of date and time in event log ... 5-12
of event log entries ... 5-12
forwarding state, STP ... D-1
forwarding table. See address table.
full duplex
configuring the ports ... 4-5
feature of module ... 2-3
G
gateway
entering address of ... 4-9
frame encapsulation type ... 4-6
manually configuring IP ... 4-9
where to specify IP address ... 4-8
where to specify IPX address ... 4-6