HP J3178A Hardware Installation Manual page 38

Configuring the Switch From the Console
Overview
To get Help on individual parameter descriptions. In all screens except
the Advanced Commands screen there is a Help option in the Actions
menu. Whenever the Actions menu is active, you can display Help for that
screen's parameters by pressing [H]. (The Actions menu is active whenever
any of the choices in the Actions menu is highlighted.) For example:
highlight on any
item in the
Actions menu
indicates that the
Actions menu is
help line
Figure 4-1. Example Showing How To Display Help
To get Help on the actions or data fields in each screen: Use the arrow
keys ( [<], [>], [^], or [v]) to select an action or data field. The help line under
the Actions menu describes the currently selected action or data field. (For
guidance in how to navigate in a configuration screen, see the instructions
provided at the bottom of the screen, or refer to "Screen Structure and
Navigation" on page 3-9.)
4-2
default values are
shown in brackets [ ]
pressing [H] or highlighting
Help and pressing [Enter]
displays Help for the
parameters listed in the
upper part of the screen