Supplementary features
Receiving an announcement
You are made aware of the announcement by an acoustic signal, the display shows
Announcement. You will be addressed via your loudspeaker.
You can listen to the announcement or stop it.
Private call with PIN
You want to make a private call on your phone or on a third-party phone.
With the aid of your PIN you can use any phone to make an external call with your
own personal settings, even if that phone is locked for external calls. The called party's
display shows your personal phone number and not the number of the phone from
which you are making your call. Any call charges incurred will be charged to you.
The call number dialled is not stored in the last-number redial list.
34
To continue the announcement as a phone call:
Pick up the handset.
➔
You are now connected to the person who initiated the announcement.
Note:
If the announcement was started to a group, all the other recipients of the
announcement are excluded.
To stop the announcement:
Press the End key.
1. Enter procedure #46 followed by your internal call number.
2. Enter your PIN.
3. Enter the external call number directly, without the exchange access digit.
Pick up the handset.
➔
The phone is now enabled. The external user is called.
Note:
The default PIN setting "0000" is not accepted. First change the PIN as
described in chapter
"Changing the
(see "User's Guide */# Procedures" on the Aastra document
portal: www.aastra.com/docfinder). If you have forgotten your PIN, your system
administrator can reset it to the default setting.
PIN", page
70
or with */# procedure *47
eud-1280/1.0 – R1.0 – 12.2010