Supplementary features
Activating/deactivating a discreet ring
You do not want to be disturbed by your phone ringing. However, you do not want to
switch off your phone.
Discreet ringing is available on your phone as an alternative to the usual ringing. If dis-
creet ring is activated, the phone rings only once.
This function must be stored under a function key (see chapter
page 77).
Suppressing your call number from your called party's terminal dis-
play
You do not want your call number to appear on the terminal display of a called party
in the public network.
You have two possibilities:
• If you never want the phone number to be displayed, set
• To suppress your call number display for certain calls only, select the function
Per call
before dialling your party's call number.
This function must be stored under a function key (see chapter
page 77).
You can also execute the function with a */# procedure (see "User's Guide */# Proce-
dures" on the Aastra document portal: www.aastra.com/docfinder).
56
In the idle state:
Press the function key for
➔
Discreet call is activated,
Before the call:
Press the function key for <CLIR>.
Notes:
• CLIR works only with external calls.
• This feature depends on the range of services offered by your provider.
<Discreet
ring>.
is displayed.
CLIR
"Configuring
keys",
Permanent.
CLIR
"Configuring
keys",
eud-1280/1.0 – R1.0 – 12.2010