Supplementary features
Activating ring alone
You want to specify which of your phones shall ring acoustically when you receive a
call.
When your system administrator has set up a phone number with several phones, you
can define on which phones a call shall acoustically be signalled using ring alone.
When you have activated ring alone on a phone, the acoustic ringing tone is deacti-
vated for all other phones (). An incoming call is signalled in the display of all phones.
You can answer the call on each of your phones.
Note:
When you have activated ring alone but deactivated the personal call routing for a phone in parallel, an
incoming call is not acoustically but only visually signalled.
This function must be stored under a function key (see chapter
page 77).
58
In the idle state:
Press the function key for
➔
Ring alone is activated/deactivated.
<Ring
alone>.
"Configuring
keys",
eud-1280/1.0 – R1.0 – 12.2010